My doll measures 10” tall (minus the horn) when made with the above materials.
You can use any weight yarn or thread that you are comfortable using, just adjust your hook size accordingly.

All of my patterns are tested and checked for errors, however sometimes things get missed, so please feel free to contact me should you encounter any errors in the pattern, or if you need any assistance.

Stitch abbreviations:
Sc: single crochet
Hdc: half double crochet
Dc: double crochet
Tr: treble crochet
Inc: increase
Dec: decrease
Sl  st: slip stitch
Ch: chain
BLO: back loops only
FLO: front loops only
*Pattern is worked in continuous rounds unless noted otherwise*

Part 1:
Arms
(Make 2- starting in turquoise)
R1: sc x 6 in magic ring (6)
R2: sc inc x 6 (12)
R3: (1 sc, sc inc) x 6 (18)
R4: 18 sc BLO (18)
R5-6: 18 sc (18) Change to white on the last st of R5
R7: (7 sc, sc dec) x 2 (16)
R8-10: 16 sc (16)
R11: (6 sc, sc dec) x 2 (14)
R12-13: 14 sc (14)
R14: (5 sc, sc dec) x 2 (12)
R15-16: 12 sc (12)
R17: (4 sc, sc dec) x 2 (10)
R18-19: 10 sc (10)
R20: (3 sc, sc dec) x2 (8)
R21: 8 sc
R22: Stuff arms, leaving the top unstuffed, 4 sc across both sides of the top of the arm to close.
Fasten off.

Legs
(Make 2- starting in turquoise)
R1: 6 sc in magic ring (6)
R2: sc inc x 6 (12)
R3: (1 sc, sc inc) x6 (18)
R4: (2 sc, sc inc) x 6 (24)
R5: In BLO – 10 sc, sc inc x 4, 10 sc (28)
R6: 28 sc (28)
R7: 8 sc, sc dec x 6, 8 sc (22)
R8: sc dec, 7 sc, sc dec x 2, 7 sc, sc dec (18) Change to white on the last st of this round.
R9-10: 18 sc (18)
R11: (7 sc, sc dec) x 2 (16)
R12-13: 16 sc (16)
R14: (6 sc, sc dec) x 2 (14)
R15-18: 14 sc (14)
R19: (5 sc, sc dec) x 2 (12)
R20: 12 sc (12)
Stuff and fasten off the 1^st leg but not the 2^nd.
Part 2 will be joining the legs and crocheting the body.

Part 2:
Body
Stuff the body as you go.
R1: Joining the legs – Starting where you left off on the 2^nd leg, 6 sc (if you are not in the center where the legs should be connected, sc however many will take you to the center stitch and then continue as written), ch 3, 12 sc around the 1^st leg, 1 sc in each ch 3, 6 sc around the remaining stitches of the 2^nd leg
R2: 6 sc, sc in the other side of the ch 3, 21 sc (30)
R3: (4 sc, sc inc) x 6 (36)
R4-9: 36 sc (36)
R10: (10 sc, sc dec) x 3 (33)
R11: 33 sc (33)
R12: (9 sc, sc dec) x 3 (30)
R13-15: 30 sc (30)
R16: (8 sc, sc dec) x 3 (27)
R17-18: 27 sc (27)
R19: (7 sc, sc dec) x 3 (24)
R20: Attaching the arms: 1 sc, sc into one stitch on the 1st arm and one stitch on the body, joining them together, repeat joining next 3 arm stitches to next 3 stitches on body; 8 sc over to the other side of the body, then sc x 4 joining the 2^nd arm to the next 4 stitches on the body; sc in remaining 7 sts on body. (24)
R21: (2 sc, sc dec) x 6 (18)
R22: (4 sc, sc dec) x 3 (15)
Stuff body and fasten off white.

Make the collar – Holding the doll upside down, join turquoise yarn to FLO of R22. Ch 3, 2 dc in FLO 1^stst, 3 dc in FLO of each of the next 14 sts (45)

Heart
(Make 1 – in pink)
R1: In magic ring: Ch 1, 8 hdc. Sl st join to first hdc (8)
R2: Ch 1, hdc inc x8. Sl st join to first hdc (16)
R3: Ch 1, (dc, tr) in same st, tr x2, (tr, dc) in next st, (dc, hdc) in next st, hdc inc x2, (dc, tr, dc) in next st, hdc inc x2, (hdc, dc) in next st, (dc, tr) in next st, tr x2, (tr, dc) in next st, sl st. 
Fasten off with long tail. Sew to the body.
Part 3 will be crocheting the head and adding a face to your doll.

Part 3:
Head
Stuff the head as you go.
R1: Attach skin tone yarn to BLO of R22 of the body in the back, 15 sc around (15)
R2: (3 sc, sc dec) x 3 (12)
R3: sc inc x 12 (24)

Insert neck support if you are using one, otherwise stuff as firmly as possible.
You can use foam hair rollers, popsicle sticks, plastic spoon, or crochet a tube the diameter of the neck and insert that. All of these methods will help prevent a bobble head.
R4: (1 sc, sc inc) x 12 (36)
R5: (5 sc, sc inc) x 6 (42)
R6: (6 sc, sc inc) x 6 (48)
R7-15: 48 sc (48)
R16: (6 sc, sc dec) x 6 (42)
R17: (5 sc, sc dec) x 6 (36)
R18: (4 sc, sc dec) x 6 (30)
R19: (3 sc, sc dec) x 6 (24)
Insert safety eyes between R12-13, 8 sts apart. Embroider eyelashes.
R20: (2 sc, sc dec) x 6 (18)
R21: (1 sc, sc dec) x 6 (12)
Finish stuffing head.
R22: sc dec x 6 (6)
Fasten off and close up head. Weave in ends.
Stitch a nose using skin tone color between R11-12. 
Add blush to cheeks if desired.

Part 4:
Hat
(Make 1 – starting in white)
R1: 6 sc in magic ring (6)
R2: sc inc x 6 (12)
R3: (1 sc, sc inc) x 6 (18)
R4: (2 sc, sc inc) x 6 (24)
R5: (3 sc, sc inc) x 6 (30)
R6: (4 sc, sc inc) x 6 (36)
R7: (5 sc, sc inc) x 6 (42)
R8: (6 sc, sc inc) x 6 (48)
R9-16: 48 sc (48) Change to turquoise on last st of R16.
R17-19: 48 sc (48)
Fasten off with long tail. Sew the hat to the head.

Ears
(Make 2 – in white)
R1: 6 sc in magic ring (6)
R2: 6 sc (6)
R3: sc inc x 6 (12)
R4: (3 sc, sc inc) x 3 (15)
R5-7: 15 sc (15)
R8: (3 sc, sc dec) x 3 (12)
R9: (2 sc, sc dec) x 3 (9)
Fasten off with long tail. Flatten ears (do not stuff) and sew to the hat.

Horn
(Make 1 – in yellow)
R1: 4 sc in magic ring (4)
R2: (1 sc, sc inc) x 2 (6)
R3: 6 sc (6)
R4: (2 sc, sc inc) x 2 (8)
R5: 8 sc (8)
R6: (3 sc, sc inc) x 2 (10)
R7: 10 sc (10)
R8: (4 sc, sc inc) x 2 (12)
R9-12: 12 sc (12)
Fasten off with tail. Stuff and sew to the hat.

Part 5:
Long curls
(Make 16 – in choice of colors)
R1: Ch 41, 2 sc in 2^nd ch from hook and next 39 chs (80)
Fasten off with tail. Sew 12 down the hat for the mane – in 2 rows of 6. Sew 4 to the body for the tail.

Short curls
(Make 4 – in choice of colors)
R1: Ch 21, 2 sc in 2^nd ch from hook and next 19 chs (40)
Fasten off with tail. Sew 2 on either side of the horn.
You’re done!
Congratulations

More Amigurumi Unicorn Girl Ideas:

Abbreviations
MR: Magic ring
Sc: Single crochet
Ch: Chain
Dc: Double crochet
Slst: Slip stitch
Inc: Increase
Dec: Decrease

Arms (Make 2)
Pink color:
Rnd 1) 6 sc in MR(6)
Rnd 2) inc*6 (12)
Rnd 3)3 inc, 9sc(15)
Rnd 4)15 sc
Rnd 5) 3 dec, 9 sc (12)
Change the thread to white:
Rnd 6-15) 12 sc (10 rows)
We fill our hands only up to the 8th row.
Crochet 2 sc offsets, fold in half and knit together 6 sc. Hide the thread.

Legs and body
We make legs 2.
Pink color.
Rnd 1) 6 sc in MR (6)
Rnd 2) inc*б (12)
Rnd 3) (1 sc, inc)*6 (18)
Rnd 4) 18 sc
Change the thread to white:
Rnd 5-6) 18 sc (2 rows)
We crochet the second leg in the same way.
Connect the legs with 3 ch. We continue to crochet the body.
Rnd 7) 18 sc on one leg, 3 sc on the chain, 18 sc on the second leg, 3 sc on the chain (42)
Rnd 8) (б sc, inc)*6 (48)
Rnd 9) (7 sc, inc)*6 (54)
Rnd 10-17) 54 sc (8 rows)
Rnd 18) (7 sc, dec)*6 (48)
Rnd 19) 48 sc
Rnd 20) (б sc, dec)*6 (42)
Rnd 21) 42 sc
Rnd 22) (5 sc, dec)*6 (3б)
Rnd 23) 36 sc
Rnd 24) (4 sc, dec)*6 (30)
Rnd 25) 30 sc
In the next row we crochet handles.
Rnd 26) 5 sc, 6sc together with the handle, 9 sc, 6 sc together with the handle, 4 sc (30)
Rnd 27-28) 30 sc (2 rows)
Fasten the thread and cut
Leave the thread for sewing. We insert the eyes between 16 and 17 rows at a distance of 7 sc. I use 10mm safety eyes

Ears (Make 2)
In white.
Rnd 1) 6 sc in MR (6)
Rnd 2) (sc, inc)*3 (9)
Rnd 3) (2 sc, inc)*3 (12)
Rnd 4)12 sc
Rnd 5) (3 sc, inc)*3 (15)
Rnd 6-7) 15 sc (2 rows)
Rnd 8) (3 sc, dec)*3 (12)
Rnd 9)12 sc
Leave the thread for sewing.

Horn
We crochet not tightly, we fill in the course of crocheting.
Rnd 1) 6 sc in MR (6)
Rnd 2) 6 sc
Rnd 3) 5 sc, 5 sc in the last loop (10)
Rnd 4) 3 dec, 3 sc, 5 sc in the last loop (11)
Rnd 5-12) We crochet according to the principle of the 4th row. At the beginning of each row we make 3 dec, then sc to the last loop, in the last loop -5 sc.
Rnd 13) 19 sc, slst.

Decor
Sew the head to the body. Sew a horn to the center of the head. Sew on the ears, stepping back from the horn 2 rows Make a tightening of the eyes. Embroider the mouth. Attach the mane, first the bangs, then at the back of the head. Sew on buttons.
Congratulations!

More Amigurumi Unicorn İdeas :

Head
1 row: 6 sc in KA (6)
2 row: (inc) * 6 (12)
3 row: (1 sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5 row: (3 sb, inc) * 6 (30)
6 row: (4 sb, inc) * 6 (36)
7 row: (5 sb, inc) * 6 (42)
8 row: (6 sb, inc ) * 6 (48)
9-16 row: 48 sc (8 rows)
17 row: (6 sc, dec) * 6 (42)
18 row: (5 sc, dec) * 6 (36)
19 row: (4 sb, dec) * 6 (30)
20 row: (3 sb, dec) * 6 (24)
21 row: – (2 sb, dec) * 6 (18)
Stuff the part.

Muzzle
1 row: 6 sc in KA (6)
2 row: (inc) * 6 (12)
3 row: (1 sc, inc) * 6 (18)
4 row: (2 sc, inc) * 6 (24)
5, 6, 7 rows: 24 sc (24)

Horns
1 row: 6 sb in KA (6)
2 row: (pr) * 6 (12)
3 row: dec, 10 sb (11)
4 row: dec, 9 sb (10)
5 row: dec, 8 sb ( 9)
6th row: dec, 7 sbn (8)
7th row: dec, 6 sbn (7)
8th row: dec, 5 sbn (6)
Do not stuff. Cut the thread, sew the end.

Curly hair for mane and tail
30 air. loops + 1 lifting loop, unfold knitting.
We knit three sc in each loop, we knit to the end of the row – we get spirals.
You can make as many of these curls as you want. The length of the curls depends on the number of air loops in the chain.
Sew on the mane and tail. The author has seven curls for the mane and three for the tail.

Ears (2 parts)
The part will have the shape of a triangle.
1 row: 7 sbn in KA, tighten the ring and unfold the knitting (i.e. do not knit in a circle)
2nd row: air lift, turn, 3 sn, 3 sbn in one loop (this will be the top of the triangle), 3 Sc
3 row: air lift, turn, 4 sb, to the top 3 sc in one loop, 4 sc
4 ​​row: air lift, turn, 5 sc, 3 sc in one loop, 5 sc
5 row: air lift, turn, 6 sbn, 3 sbn in one loop, 6 sbn We
form the shape of the eyelet by folding the two corners of the triangle together (fold the triangle in half), tie the bottom of the sbn.

Handles (2 parts)
1 row: 5 sb in KA (5)
2 row: (pr) * 5 (10)
3-11 row: 10 sb We
do not stuff the handles. We cut the thread.

Legs (2 parts)
1 row: 6 sbn in KA (6)
2 row: (pr) * 6 (12)
3-11 row: 12 sbn (9 rows)
We knit the first leg, cut the thread.
We knit the second leg, do not cut the thread, but attach it to the first.

We turn to knitting the torso :
1 row: 12 sbn on the 1st leg, 12 sbn on the 2nd leg (24)
2-9 row: 24 sbn (8 rows)
10 row: (2 sbn, dec) * 6 (18 )
11th row: 18 sbn
On the sides we will knit handles, grab 4 sbn handles. In the 12th row, you will knit the inner edge of the handles.
12th row: 18 sbn, we knit the inner edge of the handles
13th row: 18 sbn, we knit the outer edge of the handles (4 sbn we knit together)
14th row: 18 sbn
We cut the thread.
Sew on the head and other details. Embroider eyes with black thread.
More Amigurumi Unicorn İdeas:

Legend:
• St – single crochet
• Pr – increase, knit 2 sc from one loop
• U – decrease, knit 2 sc together (for the front half loops )

Legs-body
Start in yellow.
1.6 st in the ring
2. 6 pr = 12
3. (1st, pr) * 6 = 18
4. (2st, pr) * 6 = 24
5. (3rd, pr) * 6 = 30
6-7. 30 st
8. (3st, ub) * 6 = 24
9. (2st, ub) * 6 = 18 
Change color.
10-30. 18st (21 rows)

Fasten the thread, cut off, tie the 2nd leg, do not cut the thread, knit 3 VP and connect the legs, then we knit the body in a circle.
1. Article 42
2. Article 48 (6pr done on the abdomen) 
3-14. 48st (12 rows)
15. ( 14st , ub) * 3 = 45
16-17. 45st
18. (13st, ub) * 3 = 42
19-20. 42st
21. (12st, ub) * 3 = 39
22-23. 39st
24. (11st, ub) * 3 = 36
25-26. 36st
27. (10st, ub) * 3 = 33
28-29. 33st
30. (9st, ub) * 3 = 30
31-32. 30st
33. (8st, ub) * 3 = 27
34-35. 27st
36. (7st, ub) * 3 = 24
37-38. 24st
Fasten the thread, leave the end for sewing.

Head
1.6st in ring 
2.6pr = 12
3. (1st, pr) * 6 = 18
4. (2st, pr) * 6 = 24
5. (3st, pr) * 6 = 30
6. (4st, pr) * 6 = 36
7-11. 36 st (5 rows)
12. (4st, ub) * 6 = 30
13-15. 30 st (3 rows) 
16. (4st, pr) * 6 = 36
17.36 Art.
18. (5st, pr) * 6 = 42
19.42 art.
20. (6st, pr) * 6 = 48
21.48st.
22. (7st, pr) * 6 = 54
23.54 Art.
24. (8st, pr) * 6 = 60 
25-28. 60 st (4 rows) 
29. (8st, ub) * 6 = 54
30.54 Art.
31. (7st, ub) * 6 = 48
32.48 Art.
33. (6st, ub) * 6 = 42
34.42 Art.
35. (5st, ub) * 6 = 36
36. (4st, ub) * 6 = 30
37. (3st, ub) * 6 = 24
38. (2st, ub) * 6 = 18
39. (1st, ub) * 6 = 12
40.6 kill
Fasten the thread, pull off the hole, hide the thread.
Sew the head to the body at levels 22 and 29 of the head row.
Eyes between 19 and 20 rows at a distance of 10 sc. 

Hands
We start in yellow.
1.6st in ring
2.6pr = 12
3. (1st, pr) * 6 = 18
4-5. 18st
6. (4st, ub) * 3 = 15
7. (3st, ub) * 3 = 12 
Change color
8-32. 12 st (26 rows)
Fold the ends together and knit sbn, fasten the thread, leave the end for sewing. 
Sew on to the body, departing from the head 4 rows.

Ears
1.6st in the ring 
2. (1st, pr) * 3 = 9
3. (2st, pr) * 3 = 12
4. (3st, pr) * 3 = 15
5. (4st, pr) * 3 = 18 
6-8. 18 st (3 rows)
9. (4st, ub) * 3 = 15
10.15 Art.
11. (3st, pr) * 3 = 12
Fold the edges together and knit sbn. 
Sew to the head at the level of 30 and 31 rows at a distance of 8-9 sc. 

Horn
1.6st in the ring
2. 6 tbsp
3. (1st, pr) * 3 = 9
4.9 st
5. (2st, pr) * 3 = 12 
6-7. 12 st (2 rows)
8. (3st, pr) * 3 = 15
9-12. 15 st (4 rows)
Fasten the thread, leave the end for sewing.
For a twisted horn on 3, 6, 9 rows, knit in a circle sbn, clinging to the thread at the base of the column. 
Hide all ends, fill in the horn and sew to the head at the level of 25-28 rows.

Snood scarf
On the needles 3.5, cast on 8 loops and knit the wrong side to the desired length. 

Attach the mane to the head starting from the distance between the ears. 
We fasten it like a fringe (fold the thread in half, insert the hook under the base of the sbn, grab the thread at the place of addition, do not pull it all the way out and thread the ends of the threads into the formed loop, tighten it). We attach the tail in the same way. Decorate with buttons if desired (I used 6 mm buttons).

More Amigurumi Unicorn İdeas:

Ears (2 parts)
1) 6 sbn in KA
2) (1 sbn, inc) × 3 (9)
3) 9 sbn
4) (1 sbn, ub) × 3 (6)
Knit 3 sbn for both walls of the part, closing hole.

Horn (hook 2.5 mm)
1) 6 sb in KA
2) 6 sb
3) (1 sb, inc) × 3 (9)
4-5) 9 sb
6) (2 sb, inc) × 3 (12)
7) 12 sc

Handles (2 parts)
Colored:
1) 6 sb in KA
2) (1 sb, inc) × 3 (9)
3) 9 sb
Change color:
4-8) 9 sb
9) (1 sb, dec) × 3 ( 6)
Knit 3 sc for both walls, closing the hole.

Head
Color:
1) 6 sc in KA
2) 6 inc (12)
3) (1 sc, inc) × 6 (18)
4) 18 sc
5) (2 sc, inc) × 6 (24)
Change color:
6 -7) 24 sc
8) (3 sc, inc) × 6 (30)
9-10) 30 sc
11) (3 sc, dec) × 6 (24)
12) (2 sc, dec) × 6 (18)
13) (1 sc, dec) × 6 (12)
14) 6 dec (6)

Legs (2 parts)
Colored:
1) 6 sbn in KA
2) 6 inc (12)
3) 12 sbn
Change color:
4-7) 12 sbn
At the first leg, cut the thread and fasten.
From the second leg, we continue to knit 1 ch, connect with the first leg of the sl-st and continue to knit the torso.

Torso
8) (4 sc, inc) × 2, 1 sc, 1 inc in ch, (4 sc, inc) × 2, 1 sc, 1 inc in ch (30)
9-11) 30 sc
12) 30 sc for back wall of loops
13-15) 30 sc
16) (3 sc, dec) × 6 (24)
17) 24 sc
18) (2 sc, dec) × 6 (18)
19) 18 sc
20) (1 sc, dec ) × 6 (12)
21) 12 sc

Skirt
We knit for the front loops of the 12th row.
In each loop, 3 columns with one crochet – and so around the circle to the end of the row.

Legend:
VP – air loop;
RLS – single crochet;
CH – double crochet;
PRIB – increase (2 columns in 1 loop);
UB – decrease (2 columns knitted together)

HEAD
We begin to knit with a pink thread.
1 row: 6 PRS in the amigurumi ring;
2nd row: 6 PRIB (12)
3rd row: 1 PRIB x 6 times (18);
4th row: 2 PRB PRIB x 6 times (24);
5 row: 3 PRIB x 6 times (30);
6 row: 4 PRBS x 6 times (36);
7 row: 5 PRBS x 6 times (42);
8 row: 6 PRB PRIB x 6 times (48);
9-14 row: 48 PRS;
15 row: 6 PRS, UB x 6 times (42);
Change the color of the thread to white.
16 row: 42 PRS;
17 row: 5 PRS, UB x 6 times (36);
18-25 row: 36 PRS;
26 row: 5 PRS, PRIB x 6 times (42);
27 row: 6 PRS, PRIB x 6 times (48);
28 row: 7 PRS, PRIB x 6 times (54);
29-38 row: 54 PRS;
39 row: 7 PRS, UB x 6 times (48);
40 row: 6 PRS, UB x 6 times (42);
41 row: 5 PRS, UB x 6 times (36);
42 row: 4 PRS, UB x 6 times (30);
43 row: 3 PRS, UB x 6 times (24);
44 row: 2 PRS, UB x 6 times (18);
45 row: 1 PRS, UB x 6 times (12);
46 row: 6 dec.

EYES
We begin to knit with a thread of black color.1 row: 6 PRS in the amigurumi ring;
Change the thread color to green.
2nd row: 6 PRIB (12);
Change the thread color to white.
3 row: in the first loop, an increase from RLS, 2 half of the column, 3 PRIB from CH, 2 half of the column, PRIB from RLS, 3 connecting posts, a connecting column to the first loop of the row.
Change the thread color to black.4th row: 13 connecting posts

NOSE
Knit with a thread of pale pink color.
9 sc in the amigurumi ring, sew the edges together and sew to the face.

EARS
We knit with a crimson thread.
1 row: 6 PRS in the amigurumi ring;
2nd row: 1 PRS, PRIB x 3 times (9);
3rd row: 9 PRS;
4th row: 2 PRS, PRIB x 3 times (12);
5 row: 12 PRS;
6 row: 3 PRS, PRIB x 3 times (15);
7 row: 4 PRS, PRIB x 3 times (18);
8 row: 18 PRS;
9th row: 5 PRS, PRIB x 3 times (21);
10 row: 21 PRS;
Fold the edges together and knit sc.

HORN We
knit with a yellow thread with the addition of lurex.1 row: 6 PRS in the amigurumi ring;
2nd row: 1 PRS, PRIB x 3 times (9);
3-5 row: 9 PRS;
6 row: 2 PRS, PRIB x 3 times (12);
7-9 row: 12 PRS;
10 row: 3 PRS, PRIB x 3 times (15);
11-13 row: 15 PRS.
We make a mane from threads of different shades of pink . 

REAR FEET + BODY
We begin to knit with a white thread.
1 row: 6 PRS in the amigurumi ring;
2nd row: 6 PRIB (12)
3rd row: 1 PRIB x 6 times (18);
4th row: 2 PRB PRIB x 6 times (24);
5 row: 3 PRIB x 6 times (30);
6 row: 4 PRBS x 6 times (36);
7 row: we knit a loop 36 СБН for the back floor;
8-11 row: 36 PRS;
12 row: 4 PRS, UB x 6 times (30);
13-14 row: 30 PRS;Change the thread color to crimson.
15-16 row: 30 PRS;
Change the thread color to pink.
17-18 row: 30 PRS;
Change the thread color to pale pink.
19-20 row: 30 PRS;
Change the thread color to crimson.
21-22 row: 30 PRS;
Change the thread color to pink.
23-24 row: 30 PRS;
Change the thread color to pale pink.
25-26 row: 30 PRS;
Change the thread color to crimson.
27-28 row: 30 PRS;
Change the thread color to pink.
29-30 row: 30 PRS;
Change the thread color to pale pink.
31-32 row: 30 PRS;
We knit 2 parts in this way.
With a crimson thread we connect the paws to each other 3 RLS, put a marker and continue to knit in a circle (this will be the beginning of a new circle).

33-34: 54 PRS;
Change the thread color to pink.
35-36 row: 54 PRS;
Change the thread color to pale pink.37-47 row: 54 PRS;
48 row: 7 PRS, UB x 6 times (48);
49-51 row: 48 PRS;
52 row: 6 PRS, UB x 6 times (42);
53-55 row: 42 PRS;
56 row: 5 PRS, UB x 6 times (36);
57-59 row: 36 PRS;
60 row: 4 PRS, UB x 6 times (30);
61-67 row: 30 PRS;

Sew the head to the body.

FRONT FEET
Begin to knit with white thread.
1 row: 6 PRS in the amigurumi ring;
2nd row: 6 PRIB (12)
3rd row: 1 PRIB x 6 times (18);
4-8 row: 18 PRS;Change the thread color to pale pink.
9-31 row: 18 PRS
32 row: 1 PRS, UB x 6 times (12);
Fold the edges together and knit sc.
We tie the bottom of the sleeve first with connecting posts (18), a lifting loop, in the second row in the first loop of the RLS, the floor of the column, RLS, in the second connecting column, and so we alternate to the end of the row.
Sew the front legs to the body and decorate the unicorn.
The unicorn is ready

Head 
Using your white/cream colour yarn and 3mm hook
1. 6sc in the magic circle, tighten the loop and place marker (6)
2. [ 2-sc inc ] rep (12)
3. [ sc x 1, 2-sc inc ] rep (18)
4. [ sc x 2, 2-sc inc ] rep (24)
5-8. [ sc in each st ] (24)
9. [ sc x 3, 2-sc inc ] rep (30)
10. [ sc x 4, 2-sc inc ] rep (36)
11. [ sc x 15, 2-sc inc x 6, sc x 15 ] (42)
12-16. [ sc in each st ] (42)
Place safety eyes now between rows 11 and 12 approx 11 stitches apart, making sure they are exactly where you want them before you attach the backs as you will not be able to adjust their position once they are in place. Stuff now adding a little at a time until quite firm, you can add more as you continue to decrease to close the head.
17. [ sc x 5, 2-sc inv dec ] rep (36)
18. [ sc x 4, 2-sc inv dec ] rep (30)
19. [ sc x 3, 2-sc inv dec ] rep (24)
20. [ sc x 2, 2-sc inv dec ] rep (18)
21. [ sc x 1, 2-sc inv dec ] rep (12)
22. [ 2-sc inv dec ] rep (6)
Weave through the last six stitches to close the head neatly.

Ears (Two)
1. 5sc in the magic circle, tighten the loop and place marker (5)
2. [ sc in each st ] (5)
3. [ sc x 1, 2-sc inc ] rep *sc in the last st* (7)
4. [ sc in each st ] (7)
5. [ sc x 1, 2-sc inc ] rep *sc in the last st* (10)
6 – 7. [ sc in each st ] rep
Sl st to finish off leaving a long tail. Don’t stuff the ears flatten them.

Horn
1. 4sc in the magic circle, tighten the loop ( you may want to wait to place the marker until the beginning of round 3 as it’s quite tight)
2. [ sc in each st ] (4)
3. [ sc x 1, 2-sc inc ] rep (6)
4. [ sc in each st ] (6)
5. [ sc x 1, 2-sc inc ] rep (9)
6 – 7. [ sc in each st ] (9)
8. [ sc x 1, 2-sc inc ] rep *sc in the last st* (13)
9 – 10. [ sc in each st ] (13)
Sl st to finish off leaving a long tail. Stuff the horn, use the end of your hook to get the stuffing right up to the point. Pin the ears in place approx. Four rows behind the eyes and sew in place. Pin the horn to the middle of the head and sew in place.
To make a spiral of yarn around the horn, take a length of yarn (in your contrasting colour) around 30 inches long. Put your needle into the top of the head a few rows behind the horn and bring it out 1 row up in the horn as in picture one below. Leave a tail of yarn hanging out and hold this in place with your finger, now tightly wrap the yarn around the horn, it should naturally follow the rows of stitches. (pic two).
When you get to the top (this is the tricky part) keeping the yarn tightly wrapped onto the horn put your needle into the top of the horn (the very middle stitch may be too tight, so one just below will be fine) and bring it out through the horn and back to where your tail of yarn is hanging out. Making sure the yarn is all still tightly wrapped around the horn make a double knot then hide the yarn tails inside the head and cut.

Hair 
To make the hair, Take your chunky colourful yarn and wrap it around your fingers about 15 to 20 times (depending on how much hair you’d like) cut along the bottom fold with your scissors. (picture 1 below) Take a hair strand and fold in half, pull the loop through a stitch on the top of your unicorns head around the horn. Take the ends of the yarn and pull them through the loop to knot them onto the head. Carry on this way putting hair just on the top of the head and a few towards the back to make a little mane. Once the hair is all knotted on you can give her a little trim to tidy it all up. You can now add some eye lashes if you wish using black cotton or embroidery thread as in picture 4 below. Knot and hide the tails of cotton inside the head.

Legs (Two)
Starting with your contrasting colour yarn. Don’t fasten off on the second leg.
1. 6sc in the magic circle, tighten the loop and place marker (6)
2. [ 2-sc inc ] rep (12)
3. [ sc x 1, 2-sc inc ] rep (18)
4-5. [ sc in each st ] (18)
Change to Main colour
6-12. [ sc in each st ] (18)
Sl st to finish off ON FIRST LEG ONLY.
On 2nd leg 13. Ch 3, join to the other leg with a sc and work 1sc in each st around both legs, working a sc in each of the ch 3. Your round will end when you have completed the other side of the ch 3 (42) Place your marker. You will now be working the body of the unicorn. 
14-30. [ sc in each st ] (42)
31. [ sc x 5, 2-sc inv dec ] rep (36)
32-33. [ sc in each st ] (36)
34. [ sc x 4, 2-sc inv dec ] rep (30)
35-36. [ sc in each st ] (30)
Stuff now adding a little at a time until quite firm, you can add more as you continue to decrease to close the body
37. [ sc x 3, 2-sc inv dec ] rep (24)
38-39. [ sc in each st ] (24)
40. [ sc x 2, 2-sc inv dec ] rep (18)
41-43. [ sc in each st ] (18)
Sl st to finish off leaving a long tail. Finish stuffing the sew the head to the body.

Arms (Two)
Starting with contrasting colour
1. 6sc in the magic circle, tighten the loop and place marker (6)
2. [ 2-sc inc ] rep (12)
In back loops only for ONE round
3. [ sc in each st ] (12) **Back to both loops**
4-5. [ sc in each st ] (12)
6. [ sc x 1, 2-sc inv dec ] rep (8)
Change colour
7-21. [ sc in each st ] (8)
Sl st into the next st to finish off leaving a long tail. Stuff the arms in just the hooves. Sew the arms to the sides of the body. Make the tail in the same way as the hair but leave the strands longer and use 2 strands together to make the tail thicker. You should make 2 or 3 knotted hair strands very close together.

Scarf 
To make a simple chain scarf use a large hook 10 to 12 mm and chain 25 with your chunky yarn, pull each end tight to knot and cut the ends. Fold the scarf in half and put it around the unicorns neck and pull the ends through the loop.

Rosy Cheeks 
To make the rosy cheeks, take a pink/red crayon and lightly rub the crayon onto the cheeks.

Abbreviations
inc – increase
dec – invisible decrease
ch – chain
sl st – slip stitch
sc – single crochet
mr – magic ring ( ) total number of stitches at the end of each round

Horn:
Using color 2.
1) 6 sc in the mr (6)
2) sc around (6)
3) [2 sc, 1 inc] x2 (8)
4) sc around (8)
5) [3 sc, 1 inc] x2 (10)
6) sc around (10)
7) [4 sc, 1 inc] x2 (12)
8 and 9) sc around (12)
Fasten off leaving a long tail for sewing. Stuff it with polyester fiber.

Ears:
Make two. Using color 1.
1) 5 sc in the mr (5)
2) sc around (5)
3) 5 inc (10)
4 to 8) sc around (10)
Fasten off leaving a long tail for sewing.

Arms:
Make two. Using color 1.
1) 6 sc in the mr (6)
2) [1 sc, 1 inc] x3 (9)
3 to 12) sc around (9)
Fasten off leaving a long tail for sewing. Don’t stuff it.

Legs and body:
Make two. Start with color 2.
1) 6 sc in the mr (6)
2) [1 sc, 1 inc] x3 (9)
3) [2 sc, 1 inc] x3 (12)
4 and 5) sc around (12)
Change to color 1.
6 to 9) sc around (12)
Fasten off the first leg leaving a long tail. Repeat rounds 1 to 9 for the second leg, but don’t fasten it off. Ch 6. Join both legs with a sc in the stitch immediately to the left of the last stitch made in the first leg. This is going to be considered the first sc in the new round.
10) 12 sc on the first leg (1 + 11), 6 sc on one side of the ch, 12 sc on the other leg, 6 sc on the other side of the ch [36] Close the small hole that was created between both legs using that long tail of yarn left at the end of the first leg. Make a few stitches using the tapestry needle. Stuff the legs.
11 to 23) sc around [36] Start stuffing the body using polyester fiber. Continue stuffing while crocheting until the end. Stuff it very well. Stop stuffing it at round 31.
24) 2 sc, 1 dec [4 sc, 1 dec] x5, 2 sc (30)
25) sc around (30)
26) [3 sc, 1 dec] x6 (24)
27 and 28) sc around (24)
29) 1 sc, 1 dec [2 sc, 1 dec] x5, 1 sc (18)
30) sc around (18)
31) [1 sc, 1 dec] x6 (12) 32) 12 sc (12)
Fasten off leaving a long tail. Thread the tail through the body. It should come out between rounds 27 and 28. Do not cut it. This tail will be used to sew the chin to the body after we make the head. See the picture below.

Head:
Using color 1.
1) 6 sc in the mr (6)
2) 6 inc (12)
3) [1 sc, 1 inc] x6 (18)
4) 1 sc, 1 inc [2 sc, 1 inc] x5, 1 sc (24)
5) [3 sc, 1 inc] x6 (30)
6) 2 sc, 1 inc [4 sc, 1 inc] x5, 2 sc (36)
7) sc around (36)
8) 24 sc, 6 sc (picking up 6sc from the body as well – make sure you are closing the body while doing this. This means you will have to pick up both sides of the neck while crocheting), 6 sc (36)
9 to 16) sc around (36)
Using the tail left when you finished the body (the one threaded between rounds 27 and 28) and the tapestry needle, sew the head (chin) to the body. Note that the head should be lined with the body. Fasten off. Let’s continue with the head.
17) 2 sc, 1 dec [4 sc, 1 dec] x5, 2sc (30)
18) [3 sc, 1 dec] x6 (24)
19) sc around (24)
Start stuffing the head using polyester fiber. Continue stuffing while crocheting until the end.
20) 1 sc, 1 dec [2 sc, 1 dec] x5, 1sc (18)
21) [1 sc, 1 dec] x6 (12) 22) 6 dec (6)
Fasten off closing the hole in the head.

Assembly and Details:
1. Sew the horn in the top of the head.
2. Fold the base of the ear and sew it on round 5 of the head (counting from top to bottom) lining it with the horn.
3. Sew the arms between rounds 26 and 27 of the body.
4. For the mane: cut 27 pieces of yarn of 21 inches each (52 cm) in color 2. Using your hook, attach 3 pieces of yarn at each time, beginning in the top of the head, just below the horn, creating 9 groups of mane (see pictures below). Braid the mane passing the first group in front of the horn and the next two groups in front of the ear. Tie the braid. Trim it to even the ends.
5. For the tail: cut 9 pieces of yarn of 14 inches each (34 cm) in color 2. Attach one of these pieces of yarn in the back of the body between rounds 16 and 17. Put the other pieces of yarn in the opposite position, creating a cross (see pictures below). Using the piece you attached in the body, tie the other pieces together very firmly. Make the braid and tie it.Trim its ends.
6. Using embroidery yarn, embroider the eyes between rounds 12 and 13 of the head (counting from bottom to top). Leave a 3 stitches distance between them.
7. Makeup the cheeks just below the eyes.
8. Using hot glue (or any other fabric friendly glue), attach the braid to the belly of the unicorn and the flower to the head.
*for children under 3 years old, sew the details instead of gluing them. And don’t use small pieces.

Abbreviations and Tips&Tricks
(Please note that gauge is not overly important here. Unless you have wide gaps in your fabric of single crochet, then go down a hook size until you achieve tight stitches.)
*Written in US Crochet Terms*
SC– single crochet
SC INC- single crochet increase (2 SC in each stitch)
INV DEC– Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)
Magic Circle– Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds. Stuff as you go.
Leg One
Round 1: In a magic circle, SC 6
Round 2: SC INC in each stitch around (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Rounds 6-8: SC in each around. (30)
Round 9: INV DEC in the next 12. SC in the next 6. (18)
Round 10: SC in each around. (18)
Change from the pink to the white here.
Rounds 11-20: SC in each around. (18)
SC in the next two. Fasten off.
Leg Two
Round 1: In a magic circle, SC 6
Round 2: SC INC in each stitch around (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Rounds 6-8: SC in each around. (30)
Round 9: INV DEC in the next 12. SC in the next 6. (18)
Round 10: SC in each around. (18)
Change from the pink to the white here.
Rounds 11-20: SC in each around. (18)
Round 21 (This round attaches the legs and then you will begin the body): Sc in next 12. Chain 3 and then SC in the next stitch of Leg One. Take care to crochet over the tail left over by fastening off. SC in each stitch around Leg One. When you come to the three chains, SC in each chain (a total of three.) Then SC in each stitch around Leg Two. SC in each chain back (3 stitches) to the other leg. In the last SC on the last chain place your stitch marker.
Round 22: SC around. (42)
Rounds 23-36: SC around (42)
Round 37: 4 SC, INV DEC, repeat around. (35)
Round 38: 3 SC, INV DEC, repeat around. (28)
Round 39: 2 SC, INV DEC, repeat around.(21)
Change to skin color.
Round 40: 1 SC, INV DEC, repeat around. (14)
INV DEC until you have 12 stitches on the round
Round 41: SC in each stitch around. (12)
From here we will be increasing the head. From this point I am resetting the number on the rounds. Round 42 of the body is now Round 1 of the head. It will be easy to see.

Head
Round 1: SC in first, SC INC in next. Repeat around. (18)
Round 2: SC in first 2, SC INC in next. Repeat around. (24)
Round 3: SC in first 3, SC INC in next. Repeat around. (30)
Round 4: SC in first 4, SC INC in next. Repeat around. (36)
Round 5: SC in first 5, SC INC in next. Repeat around. (42)
Round 6: SC in first 6, SC INC in next. Repeat around. (48)
Round 7: SC in first 7, SC INC in next. Repeat around. (54)
Round 8-18: SC in each stitch around. (54)
Place the safety eyes in between rows 13 and 14, nine stitches apart. Sew on eyelashes here, if you want. This is also a good time to place the foam roller or dowel if you are using one. Make sure to stuff the neck around the dowel as well as you can.
Round 19: SC in the first 7, INV DEC in the next. Repeat around. (48)
Round 20: SC in the first 6, INV DEC in the next. Repeat around. (42)
Round 21: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 22: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 23: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 24: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 25: SC in the first, INV DEC in the next. Repeat around. (12)
Round 26: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed. Leave a long tail to make the
nose. 

Arms (I stuff only the hands, not the arms.)
With skin color:
Round 1: 6 SC in a magic circle.
Round 2. SC INC in each around. (12)
Round 3: SC in the first, SC INC in the next. Repeat around. (18)
Round 4-6: SC in each around. (18)
Round 7: SC in the first, INV DEC in the next. (12)
Round 8: SC in each around. (12)
Change to costume color.
Rounds 9-23: SC in each around. (12)
Fasten off and leave a long tail to sew on. I sew on between rows 37-38.

Unicorn Ears (make two)
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around. (6)
Round 3: SC INC in each around. (12)
Round 4: SC in first, SC INC in next. Repeat around. (18)
Round 5: SC in the first 2, SC INC in next. Repeat around. (24)
Round 6: SC in the first 3, SC INC in the next. Repeat around. (30)
Rounds 7-9: SC in each around. (30)
Round 10: SC in first 3, INV DEC in next. Repeat around. (24)
Round 11: SC in first 2, INV DEC in next. Repeat around. (18)
Round 12: SC in first, INV DEC in next. Repeat around. (12)
Round 13: SC in each around.

Horn
Using the gold:
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around.
Round 3: SC in first, SC INC in next. Repeat around.(9)
Round 4-5: SC in each around.
Round 6: SC in first 2, SC INC in next. Repeat around. (12)
Round 7-13: SC in each around.
Fasten off and leave a long tail to sew onto the head.

Bangs
Chain 5. In the second chain from the hook SC in the next 3 stitches. Repeat 5 times. Pin onto the head and attach along the top lines. Make sure that you make sure the hat will cover correctly before you attach.

Side Hair
Chain 15. In the second chain from the hook SC in the next 14 stitches. Repeat 5 times. Pin it to the sides, under the hat and sew it on.

Hat (With a size bigger hook)
Round 1: SC 6 in a magic circle.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Round 8: SC in first 6, SC INC in next. Repeat around. (48)
Round 9: SC in first 7, SC INC in next. Repeat around. (54)
Round 10-22: SC in each stitch around. (54)
Slip stitch in the next two. Fasten off and leave a long tail to sew on the head. Pull that hat on the head (it may be a snug fit but that is good!) and sew along the edge of the hat.

Unicorn Mane Hair
Chain 5. In the second chain from the hook SC in the next 3 stitches. Repeat 3 times. I made 5, each in a different color.
Then chain 20. In the second chain from the hook SC in the next 19 stitches. Repeat 5 times. I made 5, each in a different color.
After you attach the ears and horn to the top of the hat, attach the mane where you want it to be. Put the smaller pieces in the front and the longer in the back. I pin them and sew it on then tie off underneath the strands.

Tail
Chain to 20. Slip stitch in the second chain from hook and in each chain across. Fasten off leaving a tail to sew on. I made 5 in 5 different colors. Sew on the bottom. I attached it with a needle and then tied underneath the piece.

• YarnArt Jeans (white, blue, yellow, pink color) and Gazzal Baby Cotton (mint and peach color)
• 2.00 mm crochet hook
• 10 mm safety eyes
• Two buttons
• Fiberfill
• Yarn needle and  scissors

Height: 15 cm standing

Abbreviations:
R – row
ch – chain
st – stitch
sl st – slip stitch
sc – single crochet
dc – double crochet
tr – treble crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
BLO – back loop only
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Head
With mint yarn:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6: (4 sc, inc) repeat 6 times [36]
R 7-9: 36 sc (3 rows)
Switch to white yarn:
R 10: (5 sc, inc) repeat 6 times [42]
R 11: 42 sc
R 12: (6 sc, inc) repeat 6 times [48]
R 13: 48 sc
R 14: (7 sc, inc) repeat 6 times [54]
R 15-19: 54 sc (5 rows)
R 20: (7 sc, dec) repeat 6 times [48]
R 21: 48 sc
R 22: (6 sc, dec) repeat 6 times [42]
R 23: 42 sc
Insert eyes between R 13 and R 14 at the distance of 7 sc from each other.
R 24: (5 sc, dec) repeat 6 times [36]
R 25: 36 sc
R 26: (4 sc, dec) repeat 6 times [30]
R 27: (3 sc, dec) repeat 6 times [24]
Stuff.
R 28: (2 sc, dec) repeat 6 times [18]
R 29: (1 sc, dec) repeat 6 times [12]
Finish stuffing.
R 30: (dec) repeat 6 times [6]
Fasten off.

Ears (make 2)
With white yarn:
R 1: 6 sc in magic ring [6]
R 2: (1 sc, inc) repeat 3 times [9]
R 3: (2 sc, inc) repeat 3 times [12]
R 4: 12 sc
R 5: (3 sc, inc) repeat 3 times [15]
R 6-8: 15 sc (3 rows)
R 9: (3 sc, dec) repeat 3 times [12]
Don’t stuff.

Fold the top opening flat and 6 sc through both sides.
Fasten off, leaving a long tail for sewing.Sew ears between R 21 and R 22 at the distance of 7 sc from each other.

Horn
With mint yarn:
R 1: 6 sc in magic ring [6]
R 2: 6 sc [6]
R 3: (1 sc, inc) repeat 3 times [9]
R 4-5: 9 sc (2 rows)
R 6: (2 sc, inc) repeat 3 times [12]
R 7-8: 12 sc (2 rows)
R 9: (3 sc, inc) repeat 3 times [15]
R 10: 15 sc, sl st
Stuff.
Fasten off, leaving a long tail for sewing.

Tail
With mint yarn:
R 1: 6 sc in magic ring [6]
R 2: (1 sc, inc) repeat 3 times [9]
R 3: 9 sc
R 4: (2 sc, inc) repeat 3 times [12]
R 5: 12 sc
R 6: (3 sc, inc) repeat 3 times [15]
R 7-8: 15 sc, sl st
Stuff.
Fasten off, leaving a long tail for sewing.

Arms (make 2)
With mint yarn:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: sl st, BLO 18 sc
R 5: 18 sc
R 6: (1 sc, dec) repeat 6 times [12]
Switch to white yarn:
R 7: 12 sc
R 8: (2 sc, dec) repeat 3 times [9]
R 9-12: 9 sc (4 rows)
Stuff 1/2 arm.
Fold the top opening flat and 4 sc through both sides.
Fasten off, leaving a long tail for sewing.

Legs (make 2)
With mint yarn:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: sl st, BLO 24 sc
R 6-7: 24 sc (2 rows)
Switch to white yarn:
R 8: (2 sc, dec) repeat 6 times [18]
R 9-10: 18 sc (2 rows)
R 11: (1 sc, dec) repeat 6 times [12]
R 12-14: 12 sc (3 rows)
Stuff 1/2 leg.
Fold the top opening flat and 6 sc through both sides.
Fasten off, leaving a long tail for sewing.

Heart
With mint yarn:
In magic ring:  2 ch, 3 dc, 4 sc, 1 dc, 4 sc, 3 dc, 2 ch.
Pull magic ring and fasten off, leaving a long tail for sewing.
Sew heart to the body.

Body
With mint yarn:
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: (3 sc, inc) repeat 6 times [30]
R 6: (4 sc, inc) repeat 6 times [36]
R 7: 36 sc
R 8: (5 sc, inc) repeat 6 times [42]
R 9: 42 sc
With white yarn:
R 10: (6 sc, inc) repeat 6 times [48]
R 11-15: 48 sc (5 rows)
R 16: (6 sc, dec) repeat 6 times [42]
R 17: 42 sc
R 18: (5 sc, dec) repeat 6 times [36]
R 19: 36 sc
R 20: (4 sc, dec) repeat 6 times [30]
R 21: 30 sc
R 22: (3 sc, dec) repeat 6 times [24]
R 23: 24 sc, joining arms: 4 sc together with sc of 1st arm, 9 sc on the back, 4 sc together with sc of 2nd arm, 7 sc [24]
Stuff.
Fasten off, leaving a long tail for sewing.

Mane (make 1)
Make 23 ch. From the 4th ch from hook: 3 tr in every st to the end of row.
Sew mane to the back of the head.Mane, long part (make 4)
Make 42 ch. From the 3rd ch from hook: 2 dc in every st to the end of row [80]
Mane, short part (make 3)
Make 21 ch. From the 2nd ch from hook: 2 sc in every st to the end of row [40]
Attach jointed legs using buttons.
Congratulations !