Amigurumi Teddy Bear Ballerina Free Crochet Pattern

Required tools and materials:
Hook No. 1.75
Needle for sewing knitwear
Scissors
Marker
Yarn of two colors
Thin thread for embroidering eyebrows and nose
Holofiber
Two beads for eyes

Legend:
RLS – single crochet
PR – increase (two RLS in one loop)
UB – decrease (knit two RLS together)
SS – connecting column

We start knitting with a muzzle
1 row: 6 PRS in the amigurumi ring (6)
2 row: 1 OL, repeat 6 times (12)
3 row: (1 PRS, OL) repeat 6 times (18)
4 row: no changes (18)
5 row: (2 PRS, OL) repeat 6 times (24)
6 row: no changes (24)
7 row: (3 PRS, PR) * 6 (30)
8 row: 12 PRS, 6 PR, 12 PRS (36 )
9 row: in this row we do 6 more PR in this way – we knit RLS to the place where there was an increase in the previous row and in it we do 1 PR. And so on – in each increase from the previous row, we make a PR (between them we get 1 RLS) and tie the row with single crochet columns.
Where we make increases, an eye lift and a forehead will be formed, so the beginning of the row should be at the bottom of the head, on the side of the attachment with the neck.
12 RLS, (PR, RLS) * 6, 12 RLS (42)
10 row: in this row you need to evenly make 4 PRs:
12 RLS, PR, 3 RLS, PR, 5 RLS, PR, 3 RLS, PR, RLS to the end of the row. (46)
11 row: similar to row 10: evenly +4 PR in the upper part of the head – we do 1 PR in each increase of the previous row, all other loops are just RLS. (50)
12 – 17 row: no changes (50)
18 row: (23 PRS, UB) * 2 (48)
19 row: (6 PRS, UB) * 6 (42)
20 row: (5 PRS, UB) * 6 (36)
21 row: (4 PRS, UB) * 6 (30)
22 row: (3 PRS, UB) * 6 (24)
23 row: (2 PRS, UB) * 6 (18)
We fill the part.
24 row: (1 PRS, UB) * 6 (12)
25 row: 6 UB.
Close knitting. We fasten and cut the thread.

EARS Row
1: 8 RLS in the amigurumi ring (8)
Turn knitting:
Row 2: lifting loop, OL, 6 RLS, OL (10)
Turn knitting:
Row 3: 10 RLS.
We fasten and cut the thread, leaving the end for sewing.

BODY
Knit from bottom to top. We take the yarn of the color we chose for the clothes.
1 row: 6 PRS in the amigurumi ring (6)
2 row: 1 PR, repeat 6 times (12)
3 row: (1 PRS, PR) repeat 6 times (18)
4 row: (2 PRS, OL) repeat 6 times (24)
5 row: (3 PRS, OL) repeat 6 times (30)
6 row: (4 PRS, OL) repeat 6 times (36)
7 row: (5 PRS, OL) repeat 6 times (42)
8 row : (6 PRS, OL) repeat 6 times (48)
9-13 row: no changes (48)
14 row: (6 PRS, UB) * 6 (42)
15-16 row: no changes (42)
17 row: 6 UB, 30 PRS (36)
18 row: no changes (36)
19 row: (4 PRS, UB) * 6 (30)
20 – 24 row: no changes (30)
25 row: (3 PRS, UB) * 6 (24)
This is where the neck starts. We take the main color.
26 row: (2 sc, dec) * 6 (18)
27 row: (1 sc, dec) * 6 (12) We
fasten the thread and cut it off, leaving the required length for sewing.

HANDLES
We begin to knit in the main color:
1 row: 6 sc in the amigurumi ring (6)
2 row: PR * 6 (12)
3 row: (1 sc, OL) * 6 (18)
4 – 6 row: no changes (18)
7 row: 3 UB, 12 RLS (15)
8 – 10 row: no changes (15)
11 row: (3 RLS, UB) * 3 (12)
We fill the part. Be very careful with the filler. It is not necessary to fill the part completely, only the lower part. Otherwise, the handles will stick out strongly to the sides. Change the yarn (clothing color).
12-15 row: no changes (12)
16 row: UB * 6 (6). Close knitting.
We fasten and cut the thread.

LEGS We
knit with yarn of the main color.
1 row: 6 PRS in the amigurumi ring (6)
2 row: PR * 6 (12)
3 row: (1 PRS, PR) * 6 (18)
4 row: (2 PRS, PR) * 6 (24)
5 row (3 sc, OL) * 6 (30)
6 – 8 range: no change (30)
row 9: 6, PB 18 sc (24)
10 series: no change (24)
11 number: 4 PB 16 sc ( 20) 12-16
row: no changes (20)
We fill the part by half.
The upper part of the foot should be kept empty to better fit the body.
17 row: (UB, 8 PRS) * 6 (18)
18 row: no changes (18)
19 row: (1 PRS, UB) * 6 (12)
20 row: UB * 6 (6). Close knitting.
We fasten the thread and cut it off.

TAIL
1 row: 6 PRS in the amigurumi ring (6)
2 row: (1 PRS, OL) * 3 (9)
3 row: (1 PRS, UB) * 3 (6)
SS, fasten and cut the thread, leaving the desired length for sewing.

Slippers
1-5 row knit in the same way as the legs (up to 30 loops in single crochet), but you need to crochet half a size larger.
6 row: two air loops (hereinafter referred to as VP) and behind the back wall 30 CCH, CC (30)
7 row: 2 VP, 30 CCH for two walls, CC (30)
8 row: 9 PRS, 6 UB SSN, 9 SSN, SS (24).
We fasten the thread and cut it off. We tie a string or ribbon to the back wall of the shoes and wrap it around the leg.

FLOWER on the head
1st row: 9 PRS in the amigurumi ring (9)
2 row: 3 PRS in each loop (27)
3 row: 2 PRSs in each loop (54)
To make the flower lush, in the third line you can do 3 PRs CCH in each loop. For the rope, we collect the required amount of VP.

Design:
Sew on the head. Sew the arms and legs with a rope fastener to move. For a skirt, we use a ribbon 20-30 cm long. We string it on a thread or an elastic band and sew it to the belly on the row where the decrease began. So that the flower from the head is not lost, for reliability it is better to sew it with a thin thread on the inner wall of the loops. We decorate the face – we sew on the eyes, we embroider the nose and eyebrows.

More Amigurumi Bear İdeas:

Related Posts

error: Content is protected !!